Cross-section ovalization is one of the flaws in the thin-walled tube NC bending process.

截面畸变是薄壁管小曲半径曲成形容易出现成形缺陷之。

It's more automatable and easier to repair shafts using laser overlaying welding technology.

编程等手段运用大大提高了工作效率 ,也降低了现场操作难度。

Taking national conditions into consideration,seven development tendencies of the numerical control system are summed up.

结合我国国情，总结了系统七大发展趋势。

In recent years, numerical control machine has got important status and predomination in manufacturing of China.

近几年来我国制造业中,机床占有率不断提高,在生产中已经占有重要地位。

Toolsetting and installing of coordinate system of workpieces are important tasks while machining numerically controlled machines.

机床加工时,对刀及工件坐标系设定是项重要工作。

The design of the electric circuits of the digit-controlled lathe must be altered to meet the new requirement.

这台机床电路设计必须改动,以适应新要求。

According to the characteristics of the electronic instrument of dipmeter, a testing device is developed with computer control technology.

根据倾角电子仪特点,利用测试技术,研制开发了倾角电子仪测试装置。

The practice shows that the PMAC-based CNC system has realized customerization of man-machine interface and parametrization of realtime control elements.

实践证明，基于PMAC系统完全可以实现人机接口定制和实时制部件参化。

The paper introduces the design of the double-functional X-ray bone densometer,first-developed in China using microcomputer control technology and numerical control technology.

介绍了采用微机制技术、技术等先制技术我国首台双功能X射线骨密度仪自动制系统设计。

Using an example,the dominancy of the present optimization method is testified in improving the efficiency of NC machining and cutting manufacture cost.

通过实例验证此优化方法在孔群加工中明显提高了加工效率、降低了加工成本。

Through analyzing and accounting evocable error of tool's transmutation during milling process,the compensatory method to the error in NC machining has been put forward.

通过分析计算铣削过程中刀具变形引起误差,提出对这种误差补偿方法。

The cutters used in high speed machining(HSM) have poor rigidity, therefore the method fits to HSM of die cavity due to the unfluctuating cutting force characteristic.

其切削力平稳特性更适合于模具型腔高速加工,可以克服高速加工用刀具刚性差不足。

However, NC devices have high prices and there’re some volatile factors when NC system is under the practical operation, which incumber the testing and operation process.

但设备成本较高，同时系统在实际运转过程中存在些不稳定因素，给运调试工作带来不便。

C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine,so that the variety of process was increased ,and automation degree was also improved.

通过对C7620-11夹盘多刀半自动车床改,扩大了加工种类,提高了自动化程度,使其成为台简易型车床。

It can be easily retrofitted to almost any cutting station. The marking stylus easily penetrates most materials. The Scriber is compatible with BURNY Controls and other CNCs as well.

它能够较容易用于各类切割装置,划线笔较高材质可轻易在各种钢板上做标记.可配置在BURNY系统或其它系统上使用.

It takes the single chip microcomputer AT89C51 as the control nucleus, uses digit controlled current to control running of weighbeam, adopts infrared technology to check the balance of weighbeam.

测量仪以单片机AT89C51为制核心，使用电流源制秤杆转动，采用红外监技术检测秤杆平衡位置。

Abstract: C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine, so that the variety of process was increased ,and automation degree was also improved.

摘 要: 通过对C7620-11夹盘多刀半自动车床改，扩大了加工种类，提高了自动化程度，使其成为台简易型车床。